Lunamoon Glass builder gel №3

Glass gel №3 is a light-curing polymer material for strengthening and extending nails. Its stained-glass effect allows for the creation of a transparent, colored coating with depth and a glass-like effect.

The color intensity can be varied depending on the layer thickness: in a thin layer, it creates the effect of a transparent color veil; in a thickness of up to 2 mm, the color is more pronounced, but retains a transparent glass effect.

Advantages:

• A Rubber Base underlay is required.
• The thickness of the free edge must be at least 1 mm.
• Preliminary fixation with a flashlight - 10-15 seconds depending on the power.
• The recommended wavelength for polymerization is 365–405 nm.
• Recommended UV/LED lamp power: 36–48 W.
• The maximum thickness of the material in one stage of polymerization is up to 2 mm.
• Full polymerization – 120 seconds.
• If the material thickness is more than 3 mm, we recommend working in two stages with intermediate polymerization.

Technical specifications:

• It is acid-free.
• It has a medium consistency, closer to lower.
• It is not viscous and is easy to apply with a brush.
• Self-leveling properties are good.
• Distribute evenly over the surface of the nail plate.
• Does not leak during operation.
• The light consistency reduces the risk of air bubbles forming during application.
• Suitable for strengthening the nail plate.
• Suitable for the no-filing extension technique.
• Suitable for building up upper forms.
• It has shock absorption and does not crack when struck.
• In the cold it becomes thicker, and in the warmth it becomes thinner.
• You can reheat it further to make the consistency thinner.
• Does not cause severe burning in the lamp.

Recommendations for use:

1. We remove the preliminary coating.
2. We shorten the length of the nail to 1 mm and give it a round shape.
3. Using a 220 grit file, dust the nail without applying much pressure, lifting the scales of the nail plate, or use a 100 grit buff.
4. We do a manicure.
5. If we work with removers, we wash our hands with soap after working with them.
6. Degrease your nails with Nail Prep LUNAmoon in two stages. Use four wipes: one wipe per five fingers. First stage: wipe the nail surface. Second stage: place the wipe on an orange stick and thoroughly wipe the cuticle and sinus area.
7. We use LUNAmoon primer.
8. The LUNAmoon Rubber Base liner is best applied with a flat gel brush using a rubbing motion. Apply it to all the nail grooves and cure under the lamp for 60 seconds.
9. Remove the sticky layer.
10. We install a form for extending the free edge of the nail.
11. We lay out the Glass Gel artificial nail form. First, cure it in the lamp for 30 seconds.
12. We file the free edge and give the nail the desired shape.
13. Remove the sticky layer and clean off the dust.
14. Reapply LUNAmoon Rubber Base to the sawed areas. Let dry for 60 seconds.
15. We level the Glass Gel, place it in the lamp, and clamp it for 10-15 seconds. If the material is more sticky, clamp it for 20 seconds.
16. Dry in the lamp for 120 seconds.
17. We remove the sticky layer before applying gel polish.
18. If necessary, cover with gel polish.
19. Apply a non-sticky top coat. Dry for 120 seconds. Do not wipe after drying to maintain shine.

Reservation:

24 months. Store unopened for no more than 18 months.

TPO FREE